Simplified Remote Control - Daikin VRVIII-S Service Manual

SiENBE34-703

3.1.3 Simplified remote control

BRC2C51
1. Remove the upper part of remote control.
2. When in the normal mode, press the [BS6] BUTTON (2) (field set), and the FIELD SET
3. Select the desired MODE No. with the [BS2] BUTTON (3) (temperature setting
4. During group control, when setting by each indoor unit (mode No. 20, 22, and 23 have been
5. Push the [BS9] BUTTON (5) (set A) and select FIRST CODE NO.
6. Push the [BS10] BUTTON (6) (set B) and select SECOND CODE NO.
7. Push the [BS7] BUTTON (7) (set/cancel) once and the present settings are SET.
8. Push the [BS6] BUTTON (8) (field set) to return to the NORMAL MODE.
9. (Example) If during group setting and the time to clean air filter is set to FILTER
Test Operation
MODE NO.
UNIT NO.
MODE is entered.
[BS3] BUTTON (3) (temperature setting
selected), push the [BS8] (4) BUTTON (unit No.) and select the INDOOR UNIT NO. to be
set. (This operation is unnecessary when setting by group.)
CONTAMINATION - HEAVY, SET MODE NO. to "10", FIRST CODE NO. to "0", and
SECOND CODE NO. to "02".
FIRST
CODE NO.
SECOND
CODE NO.
).
t
Field Setting
) and the
s
73