Daikin VRVIII-S Service Manual page 122

SiENBE34-703
! The lower digit of the code changes as shown below when the UP and DOWN buttons are
Troubleshooting
pressed.
Normal status
Enters inspection mode from normal
status when the INSPECTION/TEST
button is pressed.
1 Press INSPECTION/TEST button
If no button is pressed
for 1 minute, equipment
returns to normal status.
When mode selector
button is pressed for 1
minute, equipment returns
to normal status.
"Backward" button
"Advance" button
If no button is pressed for 1
minute, equipment returns
to normal status.
5 Press MODE selector button.
Troubleshooting by Remote Control
(SE007)
3 Press
mode
selector
button.
(SF008)
111