Remote Control Service Mode - Daikin VRVIII-S Service Manual

SiENBE34-703
2.5

remote control Service Mode

How to Enter the
Service Mode
Normal operation
mode
Push the
Service Mode
1. Select the mode No.
Operation Set the desired mode No. with the
(For infrared remote control, Mode 43 only can be set.)
Method
2. Select the unit No. (For group control only)
Select the indoor unit No. to be set with the time mode
3. Make the settings required for each mode. (Modes 41, 44, 45)
In case of Mode 44, 45, push
(LCD "code" blinks.)
For details, refer to the table in next page.
4. Define the setting contents. (Modes 44, 45)
Define by pushing the timer
After defining, LCD "code" changes blinking to ON.
5. Return to the normal operation mode.
Push the
Troubleshooting
Field set mode
button for 4 seconds or longer
button.)
button one time.
Troubleshooting by Remote Control
Push the button for 4 seconds or longer
button.
button to be able to change setting before setting work.
button.
Service mode
. (For infrared remote control,
113