SiUS092231E
4.4
Service Mode of Wireless Remote Controller
The remote controller mode is hierarchized by special conditions and operation content.
Refer below for the main hierarchy of the menu.
Normal mode
Normal mode is operated by the end user.
Press for 5 seconds
Service mode
Part 7 Trial Operation and Field Settings
Simplified service diagnosis on normal mode
The code indication changes every time the TIMER CANCEL button is
pressed.
Press for
5 seconds
Press for
5 seconds
Service Check mode
In service check mode, the left-side number and the right-side
number can be identified individually.
Address setting mode
This mode sets the address corresponding to the jumper position.
Trial operation mode
Proceed to 1
Field Settings for FTX, FVXS Series
Pressing the center of the temperature adjustment
button has the same function as pressing both
buttons simultaneously.
R5000373
218