RAM 1500 Owner's Manual page 628

626 WHAT TO DO IN EMERGENCIES
• 2500 4x2 Series Trucks
For 2500 4x2 series trucks, when changing a front wheel,
place the bottle jack under the frame rail behind the
wheel. Locate the jack as far forward as possible on the
straight part of the frame.
4x2 Jacking Location
Operate the jack using the jack drive tube and the
wheel wrench. The tube extension, may be used, but
is not required.
For 2500 4x4 and all 3500 series trucks, when chang-
ing the front wheel, assemble the jack drive tube to
the jack and connect the drive tube to the extension
tube. Place the jack under the axle as close to the tire
as possible with the drive tubes extending to the
front. Connect the jack tube extension and wheel
wrench.