Tire Pressure Monitor System (Tpms) Tire Light Load Inflation Switch Description (2500 Models) - If Equipped - RAM 1500 Owner's Manual

Ram truck 2013 1500
Hide thumbs Also See for 1500:
Table of Contents

Advertisement

Vehicles with Full Size Spare
1. The matching full size spare wheel and tire assembly
has a TPM sensor that can be monitored by the TPMS.
2. If you install the full size spare in place of a road tire
that has a pressure below the low-pressure warning
limit, upon the next ignition switch cycle, a chime will
sound and the "Tire Pressure Monitoring Telltale
Light" will turn ON. In addition, the EVIC will display
a "LOW TIRE PRESSURE" message and a graphic
showing the low tire pressure value flashing.
3. After driving the vehicle for up to 20 minutes above
15 mph (25 km/h) the "Tire Pressure Monitoring
Telltale Light" will turn OFF and the pressure value
will be updated and stop flashing, as long as no tire
pressure is below the low-pressure warning limit in
any of the four active road tires.
Tire Pressure Monitor System (TPMS) Tire Light
Load Inflation Switch Description (2500 Models) –
If Equipped
WARNING!
Never operate your vehicle with the TPMS and tire
pressures set to the Light Load Inflation Pressure
settings if carrying more than two occupants (150 lbs
[68 kg] each) plus 200 pounds (91 kg) of cargo. The
vehicle "Light Load Definition" is found in the
Supplemental Tire Pressure Information Label which
is located on the rear face of the driver door opening.
Failure to do so may cause you to lose control
resulting in an accident, causing serious or fatal
injury.
STARTING AND OPERATING 557
5

Advertisement

Table of Contents
loading

Table of Contents