Programming Additional Transmitters; Transmitter Battery Replacement - RAM 1500 Owner's Manual

To cancel vehicle lowering, press the Key Fob air suspen-
sion lowering button one time during the lowering pro-
cess. When vehicle lowering is cancelled the horn will
chirp two times and the hazard lights will flash four times.
Once raising is completed, the horn will chirp one time.
For further information, refer to "Air Suspension Sys-
tem" in Starting And Operating".

Programming Additional Transmitters

If you do not have a programmed RKE transmitter,
contact your authorized dealer for details.

Transmitter Battery Replacement

The recommended replacement battery is one CR2032
battery.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29
NOTE:
• Perchlorate Material — special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
• Do not touch the battery terminals that are on the back
housing or the printed circuit board.
1. With the RKE transmitter buttons facing down, use a
flat blade screwdriver to pry the two halves of the RKE
transmitter apart. Make sure not to damage the seal
during removal.
2. Remove and replace the battery. Avoid touching the
new battery with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it
with rubbing alcohol.
3. To assemble the RKE transmitter case, snap the two
halves together.
2