RAM 1500 Owner's Manual page 609

9. Repeat steps 8 and 9 with automatic transmission in
DRIVE or manual transmission in first gear.
10. Turn OFF the engine.
11. Shift the transmission into PARK or place manual
transmission in gear (not in NEUTRAL).
12. Remove the key fob from the ignition switch.
13. Attach the vehicle to the tow vehicle using a suitable
tow bar.
14. Release the parking brake.
NOTE: With electronic shift transfer case:
• The transfer case cannot be shifted into NEUTRAL (N)
from the 4WD AUTO position (if equipped).
• Steps 2 through 5 are requirements that must be met
prior to pressing the NEUTRAL (N) button, and must
continue to be met until the shift has been completed.
If any of these requirements are not met prior to
pressing the NEUTRAL (N) button or are no longer
met during the shift, the NEUTRAL (N) indicator light
will flash continuously until all requirements are met
or until the NEUTRAL (N) button is released. • The
ignition switch must be in the ON/RUN position for a
shift to take place and for the position indicator lights
to be operable. If the ignition switch is not in the
ON/RUN position, the shift will not take place and no
position indicator lights will be on or flashing. • A
flashing NEUTRAL (N) position indicator light indi-
cates that shift requirements have not been met.
STARTING AND OPERATING 607
5