Chapter 3. Mounting The Ibm Anyplace Kiosk To The Wall; Mounting The Wall Mount Plate; Wall Mounting Requirements - IBM Models 5 Service Manual

Chapter 3. Mounting the IBM AnyPlace Kiosk to the wall

Follow these procedures to mount the IBM 4838 to the wall.

Mounting the wall mount plate

The mounting adapter ( A in Figure 16) is secured to a metal wall-mount plate
( B ), which can be installed on wood, drywall surface over studs, or a solid
concrete or brick wall.
Figure 16. System and wall mount plate

Wall mounting requirements

Note: Before mounting the wall mount plate, ensure that you are following all
When mounting, ensure that you have enough room for adequate viewing,
ventilation, and access to an AC power outlet. The method of mounting must be
able to support the combined weight of the IBM 4838 plus the suspended weight
of all the cables to be attached to the system. Use the following methods for
mounting your system:
© Copyright IBM Corp. 2007, 2008
applicable building and electric codes and accessibility requirements and
guidelines.
A
B
27