Ibm Sureports Point-Of-Sale Connections; Base Configuration; Rs-232 And Base Configuration - IBM SurePOS 700 Series Hardware Service Manual

IBM SurePorts Point-of-Sale connections

There are several possible configurations of IBM SurePorts in a SurePOS 700. This
section details some of the most common.
Attention:
devices is not supported.
Attention:
POS printers (IBM SureMark
UL Data-Processing Cables DP-3. For safe use of these ports, any third party
cables must meet the same requirements.

Base configuration

Figure 8 shows the base SurePort adapter configuration (the top slot is filled by a
blank).
Figure 8. Base configuration
A, B
C
CD A (3A), CD B (3B)
9A

RS-232 and base configuration

Figure 9 shows the RS-232 SurePort adapter with the base SurePort adapter
configuration.
Figure 9. RS-232 and base configuration
A, B
C
14
SurePOS 700-723/743/783/784 Hardware Service Guide
Hot plugging of PS/2, RS-485, powered RS-232, or powered USB
RS-485 Port 7 and Powered USB 24V port are intended for use with
CD B CD A 9A
12 V powered USB ports
24 V powered USB port
IBM cash drawer ports
Note: Port 3A detects an IBM cash drawer automatically. If you use
non-IBM cash drawers, read the voltage considerations described in
"Cash drawers" on page 22.
RS-485 scanner or a secondary RS-485 display
H
5V/12V
5V/12V
9A
CD B CD A
12 V powered USB ports
24 V powered USB port
™
4610). All IBM POS printer cables are classified as
F E
5V/12V