Preparation; Rotating Coffee Spout; Ristretto, Espresso And Coffee - Jura ENA Micro 5 Instructions For Use Manual

2 Preparation

E While a speciality coffee is being prepared,
you can stop preparation at any time. Simply
touch the symbol for the product in
question.
E If preparing two speciality coffees, you have
to stop each brewing operation separately.
E Before and during the grinding operation
you can select the coffee strength of the
ristretto Y, espresso < and coffee >
speciality coffees: 'normal' (;), 'strong' (_).
The machine always uses the preset amount of
water for the type of coffee in question. You can
change this setting (see Chapter 2 'Preparation –
Permanently setting the amount of water for the
cup size').
Your ENA has an Energy Save Mode: Soon after
the last preparation, the ENA stops heating up.
To indicate that the machine is in energy-saving
mode, after about 5 minutes the brightness of all
the symbols is reduced. The ENA must heat back
up before the next preparation.
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialised dealer.

Rotating coffee spout

Your ENA has a rotating coffee spout for preparing
one or two cups of your desired speciality coffee:
U
'1 cup' position
U
'2 cups' position
E The two coffee spout positions clearly
engage.
E If the coffee spout is in the '2 cups' position,
the desired speciality coffee is prepared
twice in succession. The coffee strength can
only be set before the first product is
prepared.

Ristretto, espresso and coffee

Ristretto Y, espresso < and coffee > are
prepared following this model.
Example: Proceed as follows to prepare one coffee.
Precondition: Your ENA is ready for use.
T Turn the coffee spout to the '1 cup' position.
T Place a cup under the coffee spout.
> T Touch the Coffee symbol to start prepara-
tion.
The Coffee > and Coffee strength (; or _)
symbols flash, the preset amount of water
flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.
E To prepare two coffees, turn the coffee
spout to the '2 cups' position. Press the
Coffee symbol > to start preparation of
two cups.
de
2 Preparation
en
fr
it
nl
es
pt
ru
37