Ground Coffee; Daily Operation; Switching On The Machine - Jura ENA Micro 5 Instructions For Use Manual

< T Touch the Espresso symbol to start
preparation.
T Turn the grinder adjustment switch to the
desired position while the grinder is
running.
The preset amount of water flows into the
cup. Preparation stops automatically.
E Please note that changing the consistency of
grind only takes effect for the second coffee
preparation.

Ground coffee

You can choose to use a second coffee variety, for
example decaffeinated coffee, with the powder
chute for ground coffee.
E Use ground coffee which is not ground too
finely. Very fine coffee can block up the
system so that the coffee only comes out in
drips.
E It is not possible to prepare two cups with
ground coffee. If the coffee spout is in the
'2 cups' position, just one cup is prepared.
E Never add more than one level measuring
spoon of ground coffee.
E The desired speciality coffee must be
prepared within approximately one minute
after filling with the ground coffee.
Otherwise the ENA stops the operation and
is once more ready for use.
E If you did not add a sufficient amount of
ground coffee, the Y, <, > and v symbols
flash and the ENA stops the operation.
All speciality coffees with ground coffee are
prepared following this model.
Example: Prepare a cup of coffee using ground
coffee.
Precondition: Your ENA is ready for use.
T Place a cup under the coffee spout.
T Open the powder chute for ground coffee.
The Ground Coffee symbol v lights up.
T Place the filler funnel for ground coffee on
the powder chute.
T Place one level measuring spoon of ground
coffee into the filler funnel.
T Close the powder chute for ground coffee.
The Y, <, > and v symbols flash.
The Y, < and > symbols light up.
> T Touch the Coffee symbol to start prepara-
tion.
The Coffee symbol > flashes, the preset
amount of water flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.

3 Daily operation

Switching on the machine

Daily maintenance of the machine and hygiene
when handling coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
When the machine is switched on, it is automati-
cally rinsed.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the
machine on.
The Y, < and > symbols flash, the
machine heats up.
The machine is rinsed, water flows out of the
coffee spout. The rinse stops automatically.
Your ENA is ready for use.
de
3 Daily operation
en
fr
it
nl
es
pt
ru
39