Permanently Setting The Amount Of Water For The Cup Size; Adjusting The Grinder - Jura ENA Micro 5 Instructions For Use Manual

2 Preparation
Permanently setting the amount of water
for the cup size
It is easy to make permanent settings for the
amount of water for all speciality coffees according
to the cup size. Adjust the amount once as shown
in the following example. Every time you prepare a
drink in the future, this amount of water will be
dispensed.
E The process for adapting the amount of
water to the cup size only works when
preparing one cup. When two cups are
prepared, the set amount is doubled.
Example: Permanently adjust the amount of
espresso to the cup size.
Precondition: Your ENA is ready for use.
T Turn the coffee spout to the '1 cup' position.
T Place a cup under the dual spout.
< T Touch the Espresso symbol for about
3 seconds until the Ristretto Y and
Coffee > symbols appear again.
< T Release the Espresso symbol.
The espresso is prepared. The Espresso <
and Coffee strength symbols (; or _) flash.
< T Touch the Espresso symbol as soon as there
is enough espresso in the cup.
Preparation stops. The amount of water for
one espresso is permanently stored.
The Espresso < and Coffee strength
symbols (; or _) flash until the machine is
ready for use again.
E You can alter this setting at any time by
repeating the above procedure.
38

Adjusting the grinder

You can adjust the grinder on a continuous scale to
suit the degree of roast of your coffee.
CAUTION
If you adjust the consistency of grind when the
grinder is not operating, the grinder adjustment
switch could be damaged.
T Only adjust the consistency of grind when
the grinder is running.
E For a coarser consistency of grind, turn the
switch to the left, for a finer grind, turn it to
the right.
The consistency of grind is correct if the coffee
flows regularly from the coffee spout. In addition a
fine, thick crema forms.
Example: Change the consistency of grind during
the preparation of a 'strong' espresso.
T Turn the coffee spout to the '1 cup' position.
T Place a cup under the coffee spout.
T Open the cover of the grinder adjustment
switch.
_ T Touch the Coffee strength 'strong' symbol.
The Coffee strength 'strong' _ symbol lights
up.