Setting The Water Hardness; Maintenance; Cleaning The Machine - Jura ENA Micro 5 Instructions For Use Manual

Hide thumbs Also See for ENA Micro 5:
Table of Contents

Advertisement

T Empty the drip tray and coffee grounds
container and reinsert them.
The Filter symbol ! lights up.
!  T  Touch the Filter symbol to start rinsing of
the filter
The Y, <, > and ! symbols flash. The filter
is rinsed.
Rinsing of the filter stops automatically. The
Coffee Grounds Container symbol ? lights
up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Y, < and > symbols flash, the
machine heats up. Your ENA is once more
ready for use.

Setting the water hardness

E If you are using the CLARIS Blue filter
cartridge and have activated it, there is no
need to set the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to set the water hardness accurately.
The following water hardness settings are available:
Water hard-
Symbol(s) shown in
ness
display
Level 1:
1 symbol illuminated
Y
1–15° dH
Level 2:
2 symbols illuminated
Y <
16–23° dH
Level 3:
3 symbols illuminated
Y < >
24–30° dH
Example: Change the water hardness setting from
'level 2' (Y <) to 'level 3' (Y < >).
Precondition: Your ENA is ready for use.
T Touch the ; and _ symbols for approxi-
mately 2 seconds.
The ;, _, & and L symbols light up brightly.
&  T  Briefly touch the Descaling symbol.
The &, Y and < symbols light up.
>  T  Touch the Coffee symbol.
The &, Y, < and > symbols light up.
&  T  Touch the Descaling symbol to confirm that
you want to set the water hardness to
'level 3'.
Your ENA is once more ready for use.

5 Maintenance

Your ENA has the following integrated mainte-
nance programmes:
U

Cleaning the machine

U
Descaling the machine
U
Changing the filter
Cleaning the machine
After 180 preparations or 80 switch-on rinses, the
ENA will prompt you to clean it.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or traces could be left
behind in the water.
T  Use only original JURA maintenance
products.
E The cleaning programme lasts approxi-
mately 15 minutes.
E Do not interrupt the cleaning programme.
The quality of cleaning will be impaired if
you do so.
E JURA cleaning tablets are available from
specialised dealers.
Precondition: Your ENA is ready for use. The
Cleaning symbol L lights up.
T Turn the coffee spout to the '2 cups'
position.
de
5 Maintenance
en
fr
it
nl
es
pt
ru
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents