Changing The Filter - Jura ENA Micro 5 Instructions For Use Manual

Hide thumbs Also See for ENA Micro 5:
Table of Contents

Advertisement

T Empty the drip tray and coffee grounds
container and reinsert them.
The Water Tank symbol M flashes.
T Remove and empty the water tank.
T Completely dissolve the contents of one blis-
ter (three JURA descaling tablets) in a
receptacle holding 500 ml of water. This may
take several minutes.
T Pour the solution into the empty water tank
and reinsert the tank.
The Descaling symbol & lights up.
&  T  Touch the Descaling symbol.
The Y, <, > and & symbols flash, water
flows directly into the drip tray.
The operation is interrupted, the Coffee
Grounds Container symbol ? flashes.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Water Tank symbol M lights up.
T Remove the water tank and rinse thor-
oughly.
T Fill the water tank with fresh, cold water and
reinsert it.
The Descaling symbol & lights up.
&  T  Touch the Descaling symbol.
The Y, <, > and & symbols flash, water
flows directly into the drip tray.
The Y, < and > symbols flash, water flows
out of the drip tray.
The operation is interrupted, the Coffee
Grounds Container symbol ? lights up.
T Empty the drip tray and coffee grounds
container and reinsert them.
Your ENA is once more ready for use.
E If the descaling operation stops unexpect-
edly, rinse the water tank thoroughly.
Descaling the machine without a prompt: You
can initiate the 'Descaling the machine' operation
manually at any time as long as the machine is
ready for use. Touch the ; and _ symbols
simultaneously for approx. 2 seconds. The ;, _,
L and & symbols light up brightly. Continue with
the first prompt (indicated by T) as described in
this section.

Changing the filter

E After 50 litres of water have flowed through,
the filter will cease to work. Your ENA will
automatically prompt you to change the
filter.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
E If the CLARIS Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition: Your ENA is ready for use. The Filter
symbol ! lights up.
!  T  Touch the Filter symbol for approximately
2 seconds.
The Water Tank symbol M lights up.
T Remove the water tank.
T Open the filter holder and remove the old fil-
ter cartridge.
T Insert a new filter cartridge into the water
tank, exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
de
5 Maintenance
en
fr
it
nl
es
pt
ru
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents