Table of contents Your ENA Micro 9 One Touch IMPORTANT SAFEGUARDS Control elements 1 Preparing and using for the first time JURA on the Internet ............................. 10 3-color plain text display ............................10 Setting up the machine ............................10 Filling the bean container ............................ 10 First-time use ................................
Page 3
Transport / Emptying the system ........................30 Disposal ...................................30 9 Technical data 10 Index 11 JURA contact details / Legal information Symbol description Warnings This is the safety alert symbol. lt is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS Follow the basic safety When using electrical appliances, basic safety precautions shall always be followed, to reduce the risk of fire, electric shock, and/or injury to precautions persons, including the following: Read all instructions. Do not touch hot surfaces. Use handles or knobs. To protect against fire, electric shock and injury to persons, do not immerse power cord, plugs, or body of machine in water or other liquid.
Page 5
Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. People, including children, who...
Page 6
IMPORTANT SAFEGUARDS J CAUTION This appliance is for household use. Any servicing other than cleaning and user maintenance shall be performed by an authorized service rep- resentative: Do not immerse base in water or try to disassemble. Do not put the appliance or any individual parts in the dishwasher. Check voltage to be sure that the voltage indicated on the name plate complies with your voltage.
Control elements Control elements J HOT J HOT Figure: Your machine may look different to the one shown. Water tank Bean container with aroma preservation Power cord (back of the machine) cover Milk pipe Hot-water spout Coffee grounds container Height-adjustable dual spout Drip tray Cup platform...
Page 9
Control elements Cover for powder chute for ground coffee Cover cap for grinder adjustment switch Powder chute for ground coffee Grinder adjustment switch 10 g Rotary Switch Display c Maintenance button m Hot Water button 5 / Cappuccino button 12 < Espresso button 6 ( Latte Macchiato button 13 Q On/Off button Rotary Switch status display...
Visit us on the Internet. T Remove any dirt or foreign objects from On the JURA website (www.jura.com) you will find inside the bean container. interesting and up-to-date information on your T Fill the bean container with coffee beans.
1 Preparing and using for the first time Precondition: Bean container is filled. T Close the filter holder. It will click into place T Insert the power plug into a power socket. audibly. Q T Press the On/Off button to switch the E After two months, the filter will cease to machine on.
1 Preparing and using for the first time First-time use without filter cartridge activation g T Turn the Rotary Switch until is displayed. FILTER - NO - k T Press the Rotary Switch. 16°dH g T Turn the Rotary Switch to change the water hardness setting, e.g.
1 Preparing and using for the first time Determining the water hardness The harder the water is, the more frequently the ENA needs to be descaled. It is therefore important to adjust the water hardness. The water hardness can be adjusted on a continu- ous scale between 1°...
2 Preparation Adjusting the grinder NOTICE Milk, sparkling mineral water or other liquids can You can adjust the grinder on a continuous scale to damage the water tank or the machine. suit the degree of roast of your coffee. T Only fill the water tank with fresh, cold water. NOTICE T Remove the water tank and rinse with cold If you adjust the consistency of grind when the...
9 therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer. You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode –...
2 Preparation Permanently setting the amount of water E If you did not fill the machine with a for the cup size sufficient amount of ground coffee, is displayed and the ENOUGH POWDER It is easy to make permanent settings for the ENA stops the operation.
3 Daily operation Hot water T Dismantle and rinse the dual spout (see Chapter 5 ‘Maintenance – Dismantling and CAUTION rinsing the dual spout’). There is a danger of scalding from hot water T Wipe the surface of the machine with a splashes.
4 Permanent settings in programming mode 4 Permanent settings in Precondition: is displayed. READY k T Press and hold the Rotary Switch until programming mode appears. RINSE g T Turn the Rotary Switch until PRODUCT Products displayed. k T Press the Rotary Switch to enter the WARNING program item.
4 Permanent settings in programming mode The harder the water is, the more frequently the Example: Change the energy-saving mode from ENA needs to be descaled. It is therefore important ENERGY p ENERGY - to adjust the water hardness. Precondition: is displayed. READY k T Press and hold the Rotary Switch until The water hardness can be adjusted on a continu-...
4 Permanent settings in programming mode k T Press the Rotary Switch to confirm the k T Press the Rotary Switch to confirm the setting. setting. , the switch-off time is set. OFF AFTER C-RINSE g T Turn the Rotary Switch until g T Turn the Rotary Switch until EXIT EXIT...
5 Maintenance Language Your ENA has the following integrated maintenance programs: In this program item you can set the language Cappuccino frother cleaning ( C-CLEAN used by your ENA. Rinsing the machine ( RINSE Cappuccino frother rinsing ( C-RINSE Example: Change the language from ENGLISH Cleaning the machine ( CLEAN...
Do not induce vomiting. Seek medical advice immediately and show label. c T Press the Maintenance button to start E JURA Cappuccino Cleaner is available from cappuccino frother rinsing. specialized dealers. , the milk CAPPUCCINO RINSING system is rinsed.
T Rinse all parts under running water. If there , the milk system and the pipe CLEANING are severely dried on milk residues, firstly are rinsed with fresh water. immerse the individual parts in JURA The operation stops automatically. Cappuccino Cleaner and then clean them READY thoroughly.
5 Maintenance T Fit the dual spout on the machine. It will T Insert the filter cartridge into the water tank, click into place audibly. exerting slight pressure. T Close the filter holder. It will click into place Inserting and activating the filter audibly.
FILTER READY c T Press the Maintenance button. machine or leave residues. T Use only original JURA cleaning tablets. INSERT FILTER T Remove and empty the water tank. These are specially formulated for your T Open the filter holder and remove the old fil- machine.
T Open the powder chute for ground coffee T Avoid generation of dust. Do not inhale dust. and drop in a JURA cleaning tablet. T After contact with skin, wash immediately with plenty of water. In case of skin irritation, seek medical advice.
5 Maintenance T Completely dissolve the contents of one Descaling the water tank blister (three JURA descaling tablets) Limescale deposits may form in the water tank. in a receptacle holding 17 oz (500 ml) of To ensure correct function of the machine, descale water.
6 Display messages 6 Display messages Message Cause/Result Action The water tank is empty or T Fill the water tank (see Chapter 1 ‘Preparing and FILL WATER not correctly inserted. You using for the first time – Filling the water tank’). TANK cannot prepare any products.
Grinder is making a very There are foreign objects T Contact customer support in your country loud noise. in the grinder. (see Chapter 11 ‘JURA contact details / Legal information’). is displayed. If the machine was T Warm the machine at room temperature.
8 Transport and environmentally friendly disposal 8 Transport and environmentally 9 Technical data friendly disposal Voltage 120 V ~, 60 Hz Transport / Emptying the system Power 1450 W Keep the packaging for your ENA. It should be used Conformity mark to protect the machine during transport.