Operation Process - Chery QQ Service Manual

antitheft indicator will flash once. This indicates this remote control has entered into
the system.
Note: The first remote control is set into the system After Step 3). Following that, press
any key of the second remote control to set it into the system. Many service stations only
operate one remote control hereto. So, another control doesn't work after setting.
Furthermore, the settings will definitely fail in case of improper process or operation. In
this case, do not replace remote control or module casually. Be advised to try again
strictly according to this operation process. Operate as in the figure below.

Operation process:

Insert key into the
hole
Wait until indicator
extinguishes
Turn ignition
switch off
Chery QQ Service Manual
Turn ignition Turn
switch on switch off
Indicator
Indicator
lights up again
extinguishes
Turn ignition
switch on
- 90 -
BCM Computer Control System
ignition Turn
switch on
Within 7 seconds
Indicator flashes 3
seconds
Press lock key of
remote control
Turn ignition switch off, wait until
10 seconds for match success
ignition Turn ignition
switch off
Turn ignition
switch on
Press lock key of another
remote control