Chery QQ Service Manual page 186

Chery QQ Service Manual
2, Spread lubricant on the "O" ring and gear, install the speedometer driven
gear assembly and then screw down the torque.
Torque 8 12 N·m
Fig.3-65
Notice: When installing speedometer driven gear, turn the differential ring driven gear
lightly to joggle the gear. Do not knock the cracks on the speedometer case, otherwise
the case may be broken.
3, Hold the input shaft assembly,
fork assembly and 3rd, 4th Shift fork assembly and fix them on the clutch case.
Notice: Use hammer to rivet the input shaft right bearing into clutch case
Be sure output shaft and differential ring driven gear are joggled
Notice In order to protect oil seal twine the insulating tape to input shaft
splined hub
4, Install the reverse shift fork, screw down the bolt
Torque 18 28 N·m
Notice: When installing the reverse shift fork, keep the distance 5mm from the end of
shift fork and the shaft hole.
output shaft assembly,
Fig.3-66
-84-
Chery Automobile Co., Ltd
Transmission System
1-Clutch case
2-Speedometer driven gear
assembly
3-Bolt
1st,
1-Clutch case
2-1st, 2nd
shaft assembly
3-3rd , 4th
shaft assembly
4-Input shaft assembly
5-Output shaft assembly
2nd shift
Shift fork
Shift fork