Chery QQ Service Manual page 168

Chery QQ Service Manual
Fig.3-27
6. Install the 3rd gear needle roller bearing lubricate needle roller bearing install
3rd gear and synchronizer ring
7. Use hammer and special tool to install synchronizer assembly.
Notice:
Be sure to keep the synchronizer insert of the synchronizer ring and the
synchronizer insert of the synchronizer assembly in the right position when installing
the synchronizer assembly.
After finishing installation, check if the 3rd gear turns smoothly.
3rd needle roller bearing, synchronizer ring and 4th needle roller bearing,
Synchronizer ring is same.
8. Spread lubricant on the needle roller bearing, and fix the snap ring, needle roller
bearing.
Notice: Be sure the snap ring has been fixed in the snap ring slot on the input
shaft.
Fig.3-28
Chery Automobile Co., Ltd
1- Right bearing
2- Input shaft
3- Special tool
1- Input shaft
2- 3rd gear
3- Synchronizer ring
4- Synchronizer assembly
5- Special tool
-66-
Transmission System