Chery QQ Service Manual page 187

Chery QQ Service Manual
Distance a
The distance
clearance is 1mm
5, Install the reserve, 5
Fig.3-67
6, Install the reverse idle gear and reverse idle gear shaft, put the mark on the
reverse idle gear shaft (Fig. A) and the step (Fig. B) on the clutch case in order.
Notice:
Be sure that reverse gear gasket has been fixed on the reverse gear.
Be sure that the distance between reverse shift fork free is 1mm
7, Clean the clutch and transmission surface, spread sealed adhesive on the
surface of the transmission, and fix it with clutch.
Seal Adhesive
8, Screw down the transmission bolt according to the correct torque .
Torque 15 22 N·m
9, Install the reverse gear shaft bolt and aluminum gasket, screw down the bolt.
Torque 18 28 N·m
10, Screw down the other 3 transmission bolt in the clutch.
Torque 15 22 N·m
5mm
a is 5mm reverse shift fork end and reverse idle gear
th
shift fork shaft assembly.
Fig.3-68
Seal adhesive HZ1213Q/320222 YAP02-92
Chery Automobile Co., Ltd
1-Reserve, 5th Shift fork
shaft assembly
2-Clutch
3-Reverse
assembly
1-Reverse idle gear shaft
assembly
2-Clutch case
3-Reverse
assembly
4-Reverse gear gasket
-85-
Transmission System
case
Shift fork
Shift fork