Jlip Id Number Setting - JVC HD-DH5US Instructions Manual

JLIP ID Number
Setting
•
Turn on the VCR and the TV, and select the AV
mode on the TV.
•
Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
VCR
CABLE
TV
/DBS
A D
The JLIP (Joint Level Interface Protocol) terminal is used
to connect the VCR to a personal computer or similar
device. By connecting through the JLIP terminals, you
can control the VCR during editing and certain other
operations, from the connected personal computer or
similar device.
When connecting this VCR to another device using the
JLIP terminals, each device must have a different JLIP ID
number.
The JLIP ID number of this VCR is preset to "1" when
shipped from the factory. You can change this number to
any other number between 1 to 99.
To change the JLIP ID number of this VCR, follow the
procedure below.
A
Access Main Menu screen
Press [MENU].
B
Select JLIP ID Set Up screen
A Press [D E] to move the arrow to "INITIAL
B Press [D E] to move the arrow to "OTHER",
C
Set JLIP ID Number
Press [FG] to move
the arrow to "JLIP
ID".
Press [D E] to enter
the desired ID
number.
B C
D
Return to normal screen
Press [MENU].
NOTE:
For further details on the JLIP system or devices, consult your
nearest JVC dealer.
U.S. customer can contact JVC directly toll free at 1-800-252-
5722.
SET UP", then press [G] or [OK].
then press [G] or [OK].
FUNCTION SET UP
CLOCK SET
MENU
EXIT
69
EN
TUNER SET UP INITIAL SET UP
GUIDE CHANNEL OTHER
JLIP ID
1
LINC
AUTO
RESET NUMBER
OK
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT