Basic Playback Features; Checking Tape Position; Playing Back Tape Repeatedly; Repeat Playback - JVC HD-DH5US Instructions Manual

Basic Playback
Features
•
Turn on the VCR and the TV, and select the AV
mode on the TV.
•
Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
E
VCR
CABLE
TV /DBS
[C.RESET]
[REW (O )]
[S]
[PLAY(I)]
B C E
F D
[POWER]
[TIMER ( )]
C
G
B E G
[FF (N)]
[STOP (L )]
[T]
D
A

Checking tape position

The tape position indicator
appears on the screen in the
following cases:
•
When you change the VCR
operation mode from the
stop mode to fast forward
or rewind mode.
•
When you perform an
Index Search (A page 31).
The position of "Z" in relation to "B" (Beginning) or "E"
(End) shows you where you are on the tape.
NOTES:
•
"SUPERIMPOSE" must be set to "ON", or the indicator will
A
not appear ( page 66).
•
It may take a few seconds for the tape position indicator to be
displayed.
To reset the time counter, press [C. RESET] on the
Remote. The counter reading becomes "0:00:00". It is
also reset when a tape is inserted.
B

Playing back tape repeatedly

— Repeat Playback

You can play back a tape repeatedly (50 times).
While playing back a tape, press and hold [PLAY (I)] for
more than 5 seconds.
The play indicator [E] on the front display panel starts
flashing slowly, and a tape will be played back 50 times.
To stop playback, press [STOP (L)] on the Remote or on
the front panel.
NOTE:
For a cassette recorded in D-VHS mode, Repeat Playback is not
possible if the cassette was recorded in LS3 mode.
29
EN
B E