Ide Configuration - Advantech MIO-2260 User Manual

3.3.2

IDE Configuration

ATA/IDE Configuration
This item allows you to select Disabled / Compatible / Enhanced.
Legacy IDE Channels
When set to Enhanced mode you can select IDE or AHCI mode. When select Com-
patible mode you can select SATA only / SATA pri, PATA sec or PATA only.
Primary/Secondary/Third IDE Master/Slave
BIOS auto detects the presence of IDE device, and displays the status of auto detec-
tion of IDE device.
>Type: Select the type of SATA driver.[Not Installed][Auto][CD/DVD][ARMD]
>LBA/Large Mode: Enables or Disables the LBA mode.
>Block (Multi-Sector Transfer): Enables or disables data multi-sectors transfers.
>PIO Mode: Select the PIO mode.
>DMA Mode: Select the DMA mode.
>S.M.A.R.T.: Select the smart monitoring, analysis, and reporting technology.
>32Bit Data Transfer: Enables or disables 32-bit data transfer.
Hard Disk Write Protect
Disable/Enable device write protection. This will be effective only if device is
accessed through BIOS.
IDE Detect Time Out (Sec)
This item allows you to select the time out value for detecting ATA/ATAPI device(s).
MIO-2260 User Manual
Figure 3.5 IDE Configuration
22