Ide Configuration - Advantech AIMB-212 User Manual

3.2.4

IDE Configuration

ATA/IDE Configuration
This can be configured as Disabled, Compatible or Enhanced.
Configure SATA as
This can be configured as IDE or AHCI.
SATA1/SATA2
While entering setup, the BIOS automatically detects the presence of SATA
devices. This displays the status of SATA device auto-detection.
CF1
While entering setup, the BIOS automatically detects the presence of CF
devices. This displays the status of CF device auto-detection.
Hard Disk Write Protect
Disable/Enable device write protection. This will be effective only if device is
accessed through BIOS.
IDE Detect Time Out (Sec)
This item allows you to select the time out value for detecting ATA/ATAPI
device(s).
AHCI Configuration
AHCI is a new interface specification that allows the SATA controller driver to
support advanced features. While entering setup, BIOS auto detects the pres-
ence of AHCI devices. This displays the status of auto detection of AHCI
devices.
Super I/O Configuration
This item enables users to set the Super IO device status, including enabling of
COM.
AIMB-212 User Manual 36