Mechanical; Jumper And Connector Locations - Advantech MIO-2260 User Manual

2.2.2.15 USB Connectors (CN14)
The board provides two USB (Universal Serial Bus) ports. This gives complete Plug
and Play, and hot attach/detach for up to 127 external devices. The USB interfaces
comply with USB specification Rev. 2.0 which supports 480 Mbps transfer rate, and
are fuse protected.
2.2.2.16 Power Connectors (CN15)
Main power connector supports single 12V input, and there's an optional choice of
DC/Jack (co-layout with 4pin power connector)
2.3

Mechanical

2.3.1

Jumper and Connector Locations

MIO-2260 User Manual
Figure 2.1 Jumper and Connector layout (Top side)
12