Recorder Menu Screen - JVC BD-X201M Instructions Manual

Setup Menu
Parameter Possible settings
DVD MENU TOP+MENU Select whether to create a TOP MENU or MENU in a completed disc (finalized disc).
TYPE [TOP] This is set before inserting a disc or when a blank disc is inserted.
NONE TOP+MENU : When finalizing a TOP MENU is created.
MENU T T+M TOP
[ToP]
NoNE NONE
DISC IN ACTION MENU Select the action when a completed disc (finalized disc) is inserted into this machine
or a DVD player.
[TITLE]
This is set before inserting a disc or when a blank disc is inserted.
dISC IN MENU MENU : Displays the TOP MENU (title menu)
[TITL] TITLE : Starts to playback TITLE1
Select the action to be taken when playback within a title of a completed disc (finalized
TITLE END MENU
REPEAT disc) is finished. This is set before inserting a disc or when a blank disc is inserted.
STOP MENU
[NEXT TITLE] REPEAT
STOP
NEXT TITLE : Start to playback the next title. In the case of playback of the final
TI ENd MENU
REPT
SToP
[NEXT]
This button is used to return to the Setup Menu screen.
MENU
MENU
Note
Settings on this page will change accordingly with the disc information when a recorded disc is loaded.
66
Description
When closing a title a MENU is created.
: When finalizing a TOP MENU is created.
When closing a title a MENU is not created.
: Neither a TOP MENU nor a MENU is created. The disc will be without a menu.
: Display the TOP MENU (title menu)
: Repeat playback within a title.
: Enter stop mode. The TOP MENU is not displayed.
title, start to playback the first title.

RECORDER MENU Screen

The following table identifies and describes the parameters that may be set using the RECORDER screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
RECORDER MENU (1/2) screen
Parameter Possible settings
CHAPTER [MANUAL] This parameter is used to indicate whether or not chapters are to be created
CREATION AUTO automatically at set intervals while recording.
MANUAL : Chapters are not to be created automatically.
CHAPTR [MANU]
AUTo AUTO : Chapters are to be created at set intervals during recording.
SET INTERVAL Every01min This parameter becomes active whenever CHAPTER CREATION has been set to
AUTO.
[Every05min] It is used to set the time interval for automatic chapter creation and is set in units of
minutes.
Every59min
INTERV 1
[5]
59
AUTO CHAPTER OFF Select whether to automatically insert a chapter mark during a recording pause.
OFF : Do not insert a chapter mark.
(REC PAUSE) [ON]
ON : Insert a chapter mark.
ATCHAP oFF
[oN]
For setting the recording quality. Recording quality and time vary with the set values
ENCODE UXP (NOT
QUALITY DVD VIDEO) as follows:
XP (When using a 4.7 GB disc)
[SP]
Set Value
LP
EP
UXP
DLP
(NOT DVD VIDEO)
DEP
XP
SP
qUALTY UXP
LP
XP
EP
[SP]
LP DLP
EP
DEP
dLP
dEP * Only UXP, XP or SP can be selected when the AUDIO ENCODE item is set to
LPCM.
AUDIO ENCODE NO AUDIO This parameter is used to set the encoding format for audio data.
LPCM NO AUDIO
[DOLBY DIGITAL]
MPEG LPCM
DOLBY DIGITAL : Dolby AC3 encoding (Compressed)
A ENC oFF MPEG
LPCM
Notes
[dd]
● Only UXP, XP or SP on the ENCODE QUALITY item can be selected when the
MPEG
AUDIO QUALITY item is set to LPCM.
● The MPEG set values can be displayed and selected when the TV TYPE item on the
SYSTEM MENU (2/2) screen is set to PAL.
Description
Use this setting when chapters are to be set manually.
The SET INTERVAL parameter below is used to specify this interval.
Recording Time Picture Quality Upload Size
40 mins High D1: NTSC = 720 x 480 dots
PAL = 720 x 576 dots
§
60 mins
120 mins Normal
180 mins
∫
240 mins
360 mins Low HalfD1: NTSC = 352 x 480 dots
∫
480 mins PAL = 352 x 576 dots
: Do not record audio sound. The recording time will be longer as
sound recording is not performed.
: Linear PCM encoding (Non-compressed)
: MPEG encoding (Compressed)
67