Specifying The Disc Status Created When The Disc Was Finalized; Setting The Encoding Format For Audio & Video - JVC BD-X201M Instructions Manual

Settings & Controls for Recording

Specifying the Disc Status Created when the Disc was Finalized

It is possible to specify the action when a finalized disc is inserted into this machine or a DVD player, or the operation when
playback of a title is finished. Also, it is possible to select whether to create a title menu (TOP MENU) or chapter menu (MENU)
when finalizing or closing a title. It is necessary to carry out the setting before recording to a blank disc. The setting is carried out
with the DISC IN ACTION Item, TITLE END Item or DVD MENU TYPE Item of the DISC MENU screen.
Set up top menu screen
Operation
DISC
The disc should be not inserted, or a blank disc should be inserted.
INPUT SELECT
1.
SYSTEM Display the DVD MENU screen
DVD MENU
RECORDER
REMOTE
DISPLAY
CLOCK ADJUST
2.
Set the DVD MENU menu screen
NETWORK
EXIT
DVD MENU screen
3.
Finish the Setting
DVD MENU
MENU Carry out either of the following operations.
• Select the MENU item, press the SET button to return to the set up top
EDIT MENU DISABLE
TYPE1
STYLE
TITLE PATERN 1
1 • Press the SET UP button to return to the normal screen.
CAPTER PATERN
THUMNAIL FORM NORMAL
DVD MENU TYPE TOP
DISC IN ACTION TITLE
NEXT TITLE
TITLE END
DVD MENU TYPE Item
This is for selecting whether to create a title menu (TOP MENU) or a chapter menu (MENU) when finalizing or closing a title.
DISC IN ACTION Item
This is to set the operation when a finalized disc is inserted into this machine or a DVD player.
TITLE END Item
This is to set the operation when playback of a title is finished.
* Settings cannot be changed after the title is recorded. Setting is possible only when there is no disc inserted or when a blank
disc is inserted. Please see page 66 for details.
30
Press the SET UP button and the set up top menu screen will be displayed.
Press either the 6 or 7 button to select the DVD MENU item, then press
the SET button.
With the 6 or 7 buttons, select Item, press the SET button and the setting
value list box will be displayed.
With the 6 or 7 buttons, select the setting value, press the SET button to
confirm the setting value.
menu screen.
Setting the Encoding Format for Audio & Video
The setting of encoding formats for audio and video is carried out from the RECORDER MENU (1/2) screen as described below.
Setting Encoding Formats
BUSY
OPEN/CLOSE
Stop the DVD recorder.
OPTION DV Y/C LINE
1.
Open the RECORDER MENU (1/2) screen.
SET UP
SET UP button
SET
TOP
MENU MENU
SET button
2.
Make the required settings on the RECORDER MENU (1/2)
RECORDER MENU (1/2) screen
screen.
RECORDER MENU (1/2)
MENU
CHAPTER CREATION MANUAL
SET INTERVAL Every05Min
AUTO CHAPTER (RECPAUSE) ON
ENCODE QUALITY SP
AUDIO ENCODE DOLBY DIGITAL 3.
Complete the setting process.
To do so, carry out one of the following procedures.
• Select MENU and press the SET button to return to the Setup Menu.
• Press the SET UP button to return to the normal screen display.
Video Encoding
Item
ENCODE QUALITY For setting the recording quality. Recording quality and time vary with the set values as follows:
(For a 4.7 GB disc)
Set Value
UXP (NOT DVD VIDEO)
XP
SP
LP
EP
DLP (Double LP)
DEP (Double EP)
* Only UXP, XP or SP can be selected when the AUDIO ENCODE item is set to LPCM.
Audio Encoding
AUDIO ENCODE
This parameter is used to set the encoding format for audio data.
NO AUDIO : Do not record audio sound.
LPCM : Linear PCM encoding
DOLBY DIGITAL : Dolby AC3 encoding.
MPEG : MPEG encoding (Effective only when the TV TYPE item from SYSTEM MENU (2/2) screen is set to PAL.)
Note
If the SET UP button is pressed while in Recording mode, the video encode quality and audio encoding format will be
displayed on-screen. Press the SET UP button once again to hide this information.
Press the SET UP button to display the Setup Menu.
Select RECORDER using the 6 and 7 buttons and then press the SET
button.
Select the parameter to be set using the 6 and 7 buttons, and then
press the SET button to display a list of possible settings.
Select the required setting using the 6 and 7 buttons, and then press
the SET button to adopt it.
Description
Recording
Picture Quality Upload Size
Time
40 mins High
∞
60 mins D1: NTSC= 720 x 480 dots
120 mins Normal PAL = 720 x 576 dots
180 mins
√
240 mins
360 mins Low HalfD1: NTSC = 352 x 480 dots
√
480 mins PAL = 352 x 576 dots
31