Table of Contents
Advertisement
Setup Menu
SYSTEM MENU (2/2) screen
Parameter
Possible settings
AC IN MODE
[POWER ON]
For selecting whether to start up in the Operate ON or OFF mode when the MAIN
POWER OFF
POWER switch at the rear of this unit is turned ON.
POWER ON : Start up in Operate ON mode
AC
[oN]
POWER OFF : Start up in Operate OFF mode
oFF
SYNC SYSTEM
[AUTO]
For selecting the synchronization method for this unit.
INTERNAL
AUTO
INTERNAL : Set to internal synchronization
SYNC
[AUTo]
INTE
TV TYPE
[NTSC]
For selecting the signal system during recording and playback.
NTSC : When recording/playing back in the NTSC mode
PAL
PAL
: When recording/playing back in the PAL mode
TV
[NTSC]
PAL
This unit will automatically be rebooted when this setting is changed.
Upon reboot, all menu items except the date/time data and hour meter will be
restored to their default values.
For selecting whether to add the JCPX-1204 standard-compliant VBID (Video Blanking
VBID OUT (WIDE)
[OFF]
ON
ID) signals to the analog video signals output from this unit. (NTSC only)
OFF : Do not add VBID signals (Copyguard signals will be added.
Vbid
[oFF]
ON : Add VBID signals
oN
Y/C TERMINAL
[S1]
This parameter is used to set the specification for the DVD recorder's VIDEO Y/C
MODE
S2
INPUT and OUTPUT terminal in order to enable the recording of wide-screen
discrimination signals.
S1 : S1 terminal mode is to be adopted. A discrimination signal for normal video
with a 4:3 aspect ratio and squeezed video is to be recorded.
Y C TM
[S1]
S2
S2 : S2 terminal mode is to be adopted. A discrimination signal for normal video
with a 4:3 aspect ratio, squeezed video, and letterbox video is to be recorded.
Squeezed video : 16:9 wide-screen content with the left and right sides
Letterbox video : Content with the top and bottom of the screen blackened out.
OPERATION
[OFF]
For selecting whether to enable operation lock.
LOCK
ON
OFF : Operation lock turns OFF and all operation buttons on the main unit are enabled
ON
: Operation lock turns ON and operation buttons on the main unit are disabled
oPLoCK
[oFF]
However, the CLOSE/OPEN, SET UP, SET and cursor buttons will not be
disabled.
oN
BACK
Returns to the SYSTEM MENU (1/2) Screen
bACK
64
Description
: Switches automatically between internal and external synchronization
compressed for normal aspect screens.
DVD MENU Screen
The following table identifies and describes the parameters that may be set using the DVD MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
Parameter
Possible settings
This parameter is used to indicate whether or not a screen for editing the title and
EDIT MENU
ENABLE
chapter menus is to be displayed when title closing or finalizing is performed.
[DISABLE]
ENABLE : The menu editing screen is to be displayed.
EdIT
oN
[oFF]
DISABLE : The menu editing screen is not to be displayed.
This parameter is used to select one of the eight different display styles that have
STYLE
[TYPE1]
TYPE2
been provided for title and chapter menus. (☞ Page 35)
BACK : returns to the DVD MENU screen.
TYPE3
TYPE4
Default settings
TYPE5
TYPE
TYPE6
TYPE7
1
TYPE8
2
BACK
3
4
STYLE
[T1]
5
T2
6
T3
7
T4
8
T5
T6
T7
T8
bACK
This parameter is used to open the TITLE PATTERN screen.
TITLE PATTERN
[1] to 6
That screen can then be used to select a display pattern for the title menu.
BACK
BACK : Returns to the DVD MENU screen.
TITL P
[1] to 6
* 6 cannot be selected when setting for factory shipment.
bACK
This parameter is used to open the CHAPTER PATTERN screen.
CHAPTER
[1] to 6
That screen can then be used to select a display pattern for the chapter menus.
PATTERN
BACK
BACK : Returns to the DVD MENU screen.
* 6 cannot be selected when setting for factory shipment.
CHAP P
[1] to 6
bACK
Thumbnail creation method for chapter and title menus during wide-signal recording
THUMBNAIL
[NORMAL]
is selected.
FORM
V-CUT
NORMAL : The input signal is to be converted into thumbnails without modification.
H-CUT
V+H CUT
V-CUT
: In this case, the top and bottom of the video content is to be removed to
THUMb
[NoR]
H-CUT
: In this case, the left and right of the video content is to be removed to
VCUT
HCUT
V+H CUT : In this case, the top, bottom, left, and right of the video content is to be
V+H
Description
Upon title closing, the THUMBNAIL EDIT screen will be displayed for
the corresponding chapter menu. (☞ Page 43)
Upon finalizing, the TITLE MENU EDIT screen will be displayed for the
title menu. (☞ Page 49)
TITLE PATTERN
CHAPTER PATTERN
1
1
2
2
3
3
4
4
5
5
1
1
2
2
3
3
If the input video has an aspect ratio of 4:3, the corresponding thumbnails
are also to have this aspect ratio.
form thumbnails.
form thumbnails. (SQUEEZE)
removed to form thumbnails. (LETTER BOX)
65
Advertisement
Table of Contents
