Table of Contents
Advertisement
LCD Display and On-Screen Content
On-Screen Content
In addition to E-E and playback screens, the monitor connected to the DVD recorder's VIDEO LINE OUT terminal can display the
following.
● Status messages
● Event messages
● Alarm messages
● The Setup Menu (☞ Page 58)
● Recording-operation control screens: REC CONTROL panel (☞ Page 40)
Status Messages
The DVD recorder's setting condition and operation status are indicated by status messages, and these messages are displayed
on E-E or playback screens.
The DISPLAY MENU screen can be used to indicate whether or not status messages are to be displayed.
DISPLAY MENU screen
To display status messages:
DISPLAY MENU
Set DISPLAY from the DISPLAY MENU screen to ON.
MENU
The various items of status information for display can be selected.
DISPLAY
ON
If DISPLAY is set to OFF, no status information will be displayed.
TITLE+CHAPTER
TITLE/CHAPTER/INDEX
ON
RECORDER MODE
TIME+DATE
TIME/DATE
ON
REMAIN
MM/DD/YY
DATE STYLE
TITLE+CHAPTER
Status Messages
LCD
5
FINALIZE
DISC TITLE
3
04/05/04
11:20:00
No.
Item
1
Operation Mode
This area indicates the DVD recorder's current mode of operation.
Use RECORDER MODE from the DISPLAY MENU screen to indicate whether or not
this is to be displayed.
NO DISC
EJECT
STOP
REC
REC PAUSE
PLAY
STL
FWD >>
FWD >>>
REV <<
REV <<<
SLOW FWD >>> : Slow-forward playback (high speed)
SLOW FWD >>
SLOW REV <<< : Slow-reverse playback (high speed)
SLOW REV <<
LOADING
RESTORE
16
4
Data relevant to recording:
000 min
If the SET UP button is pressed
while in Recording mode, the
DVD-RW
video encode quality and the
audio encoding format will be
displayed. If the SET UP button is
then pressed once again, this
information is removed from the
screen.
1
REC
TITLE 01 0:11:22
2
CHAPTER 01 0:11:22
6
Description
: The DVD recorder currently contains no disc.
: The current disc is being ejected.
: Stop mode
: Recording mode
: Recording Pause mode
: Playback mode
: Still mode
: Fast-forward playback (low speed)
: Fast-forward playback (high speed)
: Fast-reverse playback (low speed)
: Fast-reverse playback (high speed)
: Slow-forward playback (low speed)
: Slow-reverse playback (low speed)
: A disc is being loaded.
: Disc recovery in progress. (☞ Page 41)
No.
Item
2
Use TITLE/CHAPTER / INDEX from the DISPLAY MENU screen to indicate whether or
Title number / Chapter
not this is to be displayed.
number / Index number /
Counter
OFF
: No information is displayed
TITLE+CHAPTER: Title no., chapter no. and elapsed time of a title (hr: min: sec) are
INDEX+TITLE
: Index no. and elapsed time of a title (hr: min: sec) are displayed.
* When the PLAYBACK & 232C TYPE item on the SYSTEM MENU (1/2) screen is set
to VTR, the elapsed time and index no. will represent the total time and total number
respectively as accumulated from Title 1.
3
Use TIME/DATE from the DISPLAY MENU screen to select the way in which the date
Date / Time
and time are displayed.
OFF
: No information is displayed.
DATE
: Only the date is displayed.
TIME
: Only the time is displayed.
TIME+DATE : Both date and time are displayed.
● The date display style can be changed using DATE STYLE from the DISPLAY MENU
screen.
Recording mode : The date and time from the internal clock are displayed.
Playback mode : The date and time of disc recording are displayed.
4
Use REMAIN from the DISPLAY MENU screen to indicate whether or not this is to be
Remaining time
displayed.
Recording mode : The amount of video that can still be recorded on the current disc is
Playback mode : Not displayed
* Remaining time is to be used as a general guide, not as an exact figure.
Provided that a recordable disc has been inserted, this panel will be displayed whenever
5
REC CONTROL panel
REC CONTROL from the REMOTE menu screen is set to ON.
The REC CONTROL panel can be used to control recording operations. (☞ Page 43)
● This is displayed even when the DISPLAY item is set to OFF.
6
When a disc is inserted into the DVD recorder, one of the following disc status is displayed
DISC STATUS /
on the monitor screen (Approximately 3 seconds)
Index display
DVD-R
: The current disc is a non-finalized DVD-R.
DVD-RW
: The current disc is a non-finalized DVD-RW.
DVD
: The current disc is a finalized DVD-R or DVD-RW.
INVALID DISC : The current disc is neither DVD-R or DVD-RW.
(Displayed while being inserted.)
● The following will be displayed when index is recorded or erased. (3 seconds)
INDEX WRITE : Displayed when writing index. (This is not displayed if TITLE/
INDEX ERASE : Displayed when erasing index.
This is not displayed if DISPLAY item from the DISPLAY MENU screen is set to OFF.
Description
displayed.
(☞ Page 63)
displayed (in minutes).
CHAPTER/INDEX item from the DISPLAY MENU screen is set to
INDEX+TITLE or LCD item is set to INDEX.)
17
Advertisement
Table of Contents
