Dvd Menu Screen - JVC BD-X201M Instructions Manual

DVD MENU Screen

The following table identifies and describes the parameters that may be set using the DVD MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings
EDIT MENU ENABLE
[DISABLE]
EdIT
STYLE [TYPE1]
STYLE
TITLE PATTERN 1 to [5], 6
TITL P 1 to [5], 6
CHAPTER 1, [2] to 6
PATTERN
CHAP P 1, [2] to 6
THUMBNAIL [NORMAL]
FORM
V+H CUT
THUMb
This parameter is used to indicate whether or not a screen for editing the title and chapter menus
is to be displayed when title closing or finalizing is performed.
ENABLE : The menu editing screen is to be displayed. Upon title closing, the THUMBNAIL
EDIT screen will be displayed for the corresponding chapter menu. (X Page 57)
oN
Upon finalizing, the TITLE MENU EDIT screen will be displayed for the title menu.
[oFF]
(X Page 63)
DISABLE : The menu editing screen is not to be displayed.
This parameter is used to select one of the eight different display styles that have been provided
for title and chapter menus. (X Page 50)
TYPE2
BACK : Returns to the DVD MENU screen.
TYPE3
TYPE4 Default settings
TYPE5
TYPE
TYPE6
TYPE7
TYPE8
BACK
[T1]
T2
T3
T4
T5
T6
T7
T8
bACK
This parameter is used to open the TITLE PATTERN screen.
That screen can then be used to select a display pattern for the title menu.
BACK
BACK : Returns to the DVD MENU screen.
* 6 cannot be selected when setting for factory shipment.
bACK
This parameter is used to open the CHAPTER PATTERN screen.
That screen can then be used to select a display pattern for the chapter menus.
BACK
BACK : Returns to the DVD MENU screen.
* 6 cannot be selected when setting for factory shipment.
bACK
Thumbnail creation method for chapter and title menus during wide-signal recording is selected.
NORMAL : The input signal is to be converted into thumbnails without modification. If the input
V-CUT
video has an aspect ratio of 4:3, the corresponding thumbnails are also to have
H-CUT
this aspect ratio.
V-CUT : In this case, the top and bottom of the video content is to be removed to form
thumbnails.
[NoR]
H-CUT : In this case, the left and right of the video content is to be removed to form thumb-
VCUT
nails. (SQUEEZE)
HCUT
V+H CUT : In this case, the top, bottom, left, and right of the video content is to be removed
V+H
to form thumbnails. (LETTER BOX)
Description
TITLE PATTERN
1 1
2 2
3 3
4 4
5 5
6 1
7 2
8 3
Setup Menu
CHAPTER PATTERN
1
2
3
4
5
1
2
3
81