Get Started; Device Battery - Kyocera Milano C5121 User Manual

1

Get Started

Device Battery

Install Battery
1. Hold the device face down.
2. Find notch at the bottom of
the device. It is rectangular
and in the middle of the
device. Using your
thumbnail, lift the cover to
remove.
3. Place the battery in the
battery casing with the
metal contacts facing to the
top. The metal contacts of
the battery must make
contact with the metal
contacts of the battery casing.
4. Replace the battery door by
lining up the notches with
the openings at the top and
on each side of the battery
casing.
5. Snap the cover into place.
User Guide
Charge Battery
1. Connect the USB cable to
the Wall/USB Charger, and
then connect the
Micro-USB side of the
cable to the Micro-USB
jack on the left side of the
device.
2. Plug the Wall/USB Charger into a wall
outlet.
The battery icon in the upper-right corner of
the screen tells you whether the device is:
– Charging (the icon is animated)
– Partially charged
– Fully charged
You must have at least a partial charge in the
battery to make or receive calls. You can safely
recharge the battery at any time, even if it has a
partial charge.
Note: You can also charge your device by
plugging the USB cable into your PC and the
Micro-USB side into the device.
Warning: Before removing the battery, make
sure the device is powered off.
9