Table of Contents
Advertisement
Install SD Card
1. Hold the device face down.
2. Find notch at the bottom of the device. It is
rectangular and in the middle of the device.
Using your thumbnail, lift the cover to
remove.
3. Find the pull tab on the battery. Use the pull
tab to lift the battery out of the battery
casing.
4. Slide the SD card slot to the left to unlock
it.
5. Lift the SD card slot up.
6. Make sure that the metal
contacts are facing down
and slide the SD card
securely into slot.
7. Lower the SD card slot into
place, then slide the SD
card slot to the right to lock it.
8. Place the battery in the battery casing with
the metal contacts facing to the top. The
metal contacts of the battery must make
contact with the metal contacts of the
battery casing.
9. Replace the battery door by lining up the
notches with the openings at the top and on
each side of the battery casing.
10. Snap the cover into place.
Note: A notification appears when the card is
ready for use. Do not use the card until you see
the notification.
12
Memory Card
Advertisement
Table of Contents
