Table of Contents
Advertisement
Scan for Networks
1. At the Wi-Fi network list, press the Menu
key.
2. Touch Scan to refresh your network list.
Access Advanced Options
You can modify the Wi-Fi options on your
device. These options are recommended for
users experienced with configuring network
connections.
1. At the Wi-Fi network list, press the Menu
key.
2. Select Advanced.
3. Modify the advanced options as needed.
Bluetooth settings
From Bluetooth settings, you can modify the
following features.
Enable Bluetooth
Bluetooth technology allows devices to
wirelessly exchange information over a short
distance of up to 32 feet (9.8 meters).
Before you can connect your device with
another Bluetooth device, you need to enable
the Bluetooth feature on your device.
Touch Bluetooth to activate Bluetooth. A
check mark indicates Bluetooth is active. Your
device automatically scans for available
devices. Once the scan is complete, a list of
available devices is shown.
Note: Using Bluetooth will drain the battery
faster.
User Guide
Pair with a Device
To enable your device to communicate with a
Bluetooth device, you need to "pair" the device
with your device. The following instructions
describe the process. You may also need to
reference the user guide provided with your
Bluetooth device.
1. Prepare the Bluetooth device (accessory)
for pairing as described in the device's user
guide.
2. Touch Scan for devices. Your device then
searches and detects any available
Bluetooth device in the vicinity. The
Bluetooth feature on your device must be
enabled to find devices.
3. At the device list, touch and hold the
device. If prompted, accept the pairing.
4. If necessary, enter the password provided
with the Bluetooth device.
5. Touch OK to save pairing.
To unpair a device, select the device. Press the
Menu key and select Unpair or Disconnect &
unpair (if connected).
Note: Once a Bluetooth device has been
paired, the devices will not prompt for
password entry again.
Connect to a Device
Before you can use Bluetooth, you must get
your device ready to communicate with
another device. This is called "connecting".
Some devices will attempt to automatically
57
Advertisement
Table of Contents
