• Bed and breakfast type environments may result in personal injury, property damage and affect your ability to make a claim under the Electrolux • Catering and similar non-retail applications manufacturer’s warranty provided with your product.
IMPORTANT INSTRUCTIONS BEFORE USING YOUR APPLIANCE CAUTION Read the following carefully to avoid an electric Before you use the appliance, we recommend that shock or fire. you read through the relevant sections of this manual, which provides the description of your appliance and It is important to use your cooktop safely.
PART NAMES Description of the burner Figure 1b Figure 1a Burner Injector Burner flame ports Skirt Ignition spark plug Flame safeguard sensor Figure 2a EHG635BE Burners – this unit has a small, large and dual wok burner Ceramic Glass hob – the glass hob is resistant to heat, cold and rapid temperature changes, but is vulnerable to impact.
Page 5
Figure 2c Figure 2b EHG645BE EHG645SE Burners – this unit has a small, medium, large and Burners – this unit has a small, medium, large and dual wok burner dual wok burner Ceramic Glass hob – the glass hob is resistant to Removable cast iron trivet (right) heat, cold and rapid temperature changes, but is Control knob...
Page 6
PART NAMES (CONTINUED) Figure 2d Figure 2e Front view Scale: Front view Scale: EHG755SE EHG955SE Burners – this unit has a small, medium (2 per), large Burners – this unit has a small, medium (2 per), large and dual wok burner...
Page 7
Figure 2g Figure 2f Front view Scale: EHG955BE EHG953BE Burners – this unit has a small, medium (2 per), large Burners – this unit has a small, medium (2 per), large and dual wok burner and dual wok burner Ceramic Glass hob – the glass hob is resistant to Ceramic Glass hob –...
Page 8
PART NAMES (CONTINUED) Figure 2h Figure 2i EHG631BEA EHG641SEA Burners – this unit has a small, medium and a wok Burners – this unit has a small, medium (2 per) and burner wok burner Ceramic Glass hob – the glass hob is resistant to...
BEFORE FIRST USE INSTALLATION CONTROLS • An authorised person must install this appliance and Each burner is controlled by a control knob. The markings MUST provide a Certificate of Compliance. on the control panel indicate which burner the knob This certificate should be retained along with controls, and the setting for that burner (see Figure 3).
USING YOUR COOKTOP BURNERS Choice of burner Figure 3 For your convenience there is a choice of burners: Standard burner • A small burner for special low heat and slow cooking. • A medium burner for normal cooking and simmering (one on the four burner models and two on the five burner models).
CLEANING AND CARE CAUTION Ensure the appliance is off and cool before cleaning. Enamel (on burner skirts and trivets) Persistent stains may require rubbing with a nylon scourer or creamed powder cleansers. Household enamel cleaners are available, follow the manufacturer’s instructions in their use. Harsh abrasive cleaners, powder cleaners, steel wool or wax polishes should not be used.
Page 12
Ceramic Cooktop Cleaning CUSTOMER ADVICE Sometimes SURFACE stains appear to be a “bubble” mark under the ceramic glass. These can be cleaned off with a razor blade scraper and ceramic cleaner. Keeping the ceramic cooktop clean and protected will keep it in good condition and help avoid breakage.
Page 13
ACC031 Available at the following web shops or distributors. https://shop.electrolux.com.au/ Remove deposits with a soft cloth and warm soapy water then wipe with a dry soft cloth. If there are signs of yellowing or stubborn stains, use a suitable stainless steel cleaner Steel Kleen (ACC032 - Available from our web shop), apply with a soft cloth and clean in the direction of the stainless steel grain only.
TROUBLE SHOOTING If you have a problem with the cooktop, check the table below. You may be able to solve the problem and this will save you from paying for a service call. You will have to pay for a service call even in the warranty period if the problem is one listed below.
INSTALLATION INSTRUCTIONS This appliance must be installed by an authorised person CAUTION and in compliance with: Cooktops are supplied set up for natural gas (NG). AS/NZS 5601.1 Gas Installations Part 1: General To use on LPG, the injectors must be changed Installations, and AS/NZS 5601.2 Gas Installations using the conversion kit supplied.
Page 16
INSTALLATION INSTRUCTIONS (CONTINUED) Figure 5b – EHG755SE 151 min* 146 min* gas supply connection location Figure 5c – EHG955SE & EHG955BE 146 min* 136 min* gas supply connection location * to combustible surface (dimension is not relevant if the adjacent surface is non-combustible).
Page 17
Figure 5d – EHG953BE gas supply connection location 161 min* 126* Figure 5e – EHG631BEA gas supply connection location 131min* 135 min* * to combustible surface (dimension is not relevant if the adjacent surface is non-combustible).
Page 18
INSTALLATION INSTRUCTIONS (CONTINUED) Figure 5f – EHG641SEA gas supply connection location 131 min* 144 min* Clearance from bench to cupboard Minimum clearance (Refer to page 19) * to combustible surface (dimension is not relevant if the adjacent surface is non-combustible).
TECHNICAL DATA We reserve the right to alter these specifications. This appliance conforms to AS 5263. Table 2 features EHG635BE EHG645BE EHG645SE EHG755SE Cooking zones Yes, dual Yes, dual Yes, dual Yes, dual Ignition 230-240V 230-240V 230-240V 230-240V Trivet...
INSTALLATION PROCEDURE The bench cutout should be made as per cutout Note 3: The height of the top of the pan supports dimensions in Table 2 and Figure 5. (top of the trivets) with respect to the bench top...
Page 23
Figure 6a – EHG645SE & EHG645BE & EHG635BE combustible surface Figure 6b – EHG755SE combustible surface NOTE: Distances shown to adjacent walls/surfaces are for the distance to a combustible surface. If the surface is not combustible the measurement can be smaller than that shown.
Page 24
INSTALLATION PROCEDURE (CONTINUED) Figure 6c – EHG955SE & EHG955BE combustible surface combustible surface Figure 6d – EHG953BE no minimum distance NOTE: Distances shown to adjacent walls/surfaces are for the distance to a combustible surface. If the surface is not...
Page 25
Figure 6e – EHG631BEA combustible surface Figure 6f – EHG641SEA combustible surface NOTE: Distances shown to adjacent walls/surfaces are for the distance to a combustible surface. If the surface is not combustible the measurement can be smaller than that shown.
Page 27
Figure 7a - Mastic seal position for model EHG645SE& EHG641SEA 25mm 12mm 12mm...
Page 28
INSTALLATION PROCEDURE (CONTINUED) Figure 7b - Mastic seal position for model EHG755SE 25mm Figure 7c - Mastic seal position for model EHG955SE 25mm...
GAS CONNECTION OPERATION ON N.G./S.N.G ELBOW POSITIONING This appliance is supplied for use with Natural Gas. It is possible to reposition the elbow if required by However, it can be converted for use with LPG. loosening the locking nut and elbow by using two Refer to LP conversion on page 31.
Page 30
GAS CONNECTION (CONTINUED) CHECKING THE GAS SUPPLY Assembly of the regulator The assembly of the regulator to the cooktop manifold is Check the manometer zero point is correct. achieved via the elbow union and sealing washer supplied, refer to figure 8.
Page 31
LPG CONVERSION supply line in the correct orientation, the arrow on the base of the body indicates the direction of gas flow. This appliance is supplied set up for Natural Gas usage. Once these checks have been completed, if the A conversion kit is included with the product for Universal regulator still fails to perform in a satisfactory manner LPG usage.
ELECTRICAL CONNECTION (220-240 VOLTS) The appliance is supplied with a standard 7.5 Amp service cord terminated by a 3-pin plug for connection to a standard household socket. The electrical supply is required to power the electronic ignition system. NOTE! It will be necessary for servicing purposes to disconnect the electrical power supply.
Page 33
TESTING APPLIANCE OPERATION After installation, test the appliance and ensure that it CAUTION operates correctly before handing it over to the customer. The following procedure is recommended: Servicing must only be carried out by an authorised service person. Turn on the gas and electricity supply and attempt ignition on all burners, both separately and in Injector sizes required for various gas types are shown in combination.
New Zealand, the Appliances come with a guarantee by Electrolux Appliance to and from Electrolux or its ASC. Travel and transportation will pursuant to the provisions of the Consumer Guarantees Act, the Sale be arranged by Electrolux as part of any valid warranty claim.