Table of Contents
Advertisement
4.
Enter the user name and password, and then click [OK].
If this is the first time to do this, enter "admin" as the user name and leave the password
blank.
To ensure security, it is important you change the password.
5.
In the menu area, click [Settings].
6.
Specify the machine settings.
7.
Click [OK].
The specified settings are transmitted to the machine.
Changing the Machine Settings
You can specify the following settings on each page of Web Image Monitor.
[Device Settings] area
[System] page
•
[General Settings]
•
You can specify [Device Name], [Comment], and [Location].
[Help Source File Setting]
•
You can specify [Help Source File].
[Date/Time] page
•
You can specify [Set Date], [Set Time], [SNTP Server Address], [SNTP Polling Interval],
[Time Zone], and [Daylight saving time settings].
[Email] page
•
For details about the items and descriptions, see page 138 "Notifying the Machine Status
by E‐mail".
[ROM Update] page
•
You can check the ROM firmware version and update the firmware as necessary.
Download the latest update and update the firmware according to the displayed
instructions.
[Auto Email Notification] area
See page 138 "Notifying the Machine Status by E‐mail".
[Administrator Tools] area
[Administrator Authentication] page
•
You can specify [New Password] and [Confirm New Password].
[Restore Defaults] page
•
You can restore the default settings for the network interface.
[Interface] area
[Interface Settings] page
•
[Ethernet]
•
You can specify [Ethernet Speed].
Using Web Image Monitor
135
Advertisement
Table of Contents
