NEC Xn120 Getting Started Manual page 37

Program 11-07-01
Give the department group a
pilot number.
Try to use a number that is
easy to remember.
For example use:
Pilot number 501 for group 1
Pilot number 502 for group 2
etc.
See Also:
There are no related settings.
Configuration Sheet: Department Groups
With defaults shown.
Telephone Department
Group
number
number
16-02-01
default=1
200
201
202
203
204
205
206
207
Department Pilot
Group Number
number
11-07-01
1-32
1
2
3
4
There are 32 groups available, only 4 are listed as this is usually sufficient.
Xn120 Getting Started Guide
Default Setting:
There are no pilot numbers assigned.
Ø For each group enter the pilot number (3 digits required) you
will dial to reach the group.
Ø Press HOLD to confirm the entry and step to the next group.
If you duplicate a number you will see Duplicate Data, the
entry will be removed and you can enter a new number.
Ø Press DC several times when you are done to return to the
Program Mode.
Ø (Press SPK to save changes and exit if you are finished).
Priority
number
16-02-02
1
2
3
4
5
6
7
8
Ring in Try once or
priority/random continually
16-01-02
default=0 Priority default=0 Once
Configure the Xn120
11-07-01 TEL Gr1
Ext Grp No. _
Ring time
before step on
16-01-04 16-01-09
default=15 seconds
Press Vol p q
to select the
group number
37