Telephone Ringing Style; Internal Call Ringing Mode - NEC Xn120 Getting Started Manual

Telephone Ringing Style

You may want to change this setting if:
·
You want to change the ringing style of outside and internal calls to telephones.
System Operation:
The ringing patterns are set for the system by Program 20-15-01
The default setting is:
Outside calls have a single ring pattern of 2 seconds on / 1 second off.
Internal calls have a double ring pattern of 0.4 seconds on / 0.2 seconds off / 0.4 seconds on / 2 seconds off.
1 Program 20-15-01
20-15-01 sets the ring pattern
for outside calls.
(Most users would expect a
double ring for outside calls so
set this option to 8)
20-15-03 sets the ring pattern
for internal calls.
(Most users would expect a
single ring for internal calls so
set this option to 3)

Internal Call Ringing Mode

You may want to change this setting if:
·
You want to change the way internal calls to telephones are presented. Internal calls can either ring the
phone or voice announce where the caller can speak directly to the loudspeaker of the phone they are
calling
System Operation:
The mode is set for the system by Program 20-02-12
The default setting is Voice Announce mode.
Program 20-02-12
1
Select the mode for internal
calls.
! Most users prefer ring mode
so set this option to 1.
Xn120 Getting Started Guide
20-15-01
TRK Normal INC 8
Ø Enter the ring pattern for outside calls, you can overwrite the
current entry. (3 is a single ring, 8 is a double ring).
Ø Press HOLD to confirm the entry and step to the next option.
Ø Leave this item set to 8, Press HOLD to step to the next item.
20-15-03
Internal INC
Ø Enter the ring pattern for internal calls. (3 is a single ring, 8 is a
double ring).
Ø Press HOLD to confirm the entry and step to the next option.
Ø Press DC several times when you are done to return to the
Program Mode.
Ø (Press SPK to save changes and exit if you are finished).
20-02-12
ICM Call Type
Ø Enter the mode for internal calls, you can overwrite the current
entry. (1 is Ring mode, 0 is Voice Announce mode).
Ø Press HOLD to confirm the entry.
Ø Press DC several times when you are done to return to the
Program Mode.
Ø (Press SPK to save changes and exit if you are finished).
Configure the Xn120
3
1
29