Konica Minolta bizhub C525 User Manual page 112

Before making copies
4
Using the keypad, type in the length of time until the machine enters
Sleep mode again.
Specify a length of time between 5 minutes and 9 hours and 59 min-
utes.
How can a single digit be input?
?
% First, type in "0". If a minutes setting of less than 5 is entered, the
setting changes to 5 minutes. In addition, a minutes setting of 60 or
more cannot be specified.
5
Touch [OK].
The message "Ready to copy." appears on the touch panel.
Note
As the factory default, the weekly timer is not set.
If the message "Access restricted due to weekly timer. Input amount of
time prior to entering Sleep Mode." or "Access restricted due to weekly
timer. Input password to interrupt timer." appears after the [Power] (aux-
iliary power) key is pressed, the weekly timer is set.
!
Detail
During the set time, the copy operations can be performed as usual.
From the Password for Non-Business Hours screen (displayed from Ad-
ministrator mode), the machine can be set so that the screen for entering
the password for non-business hours is not displayed.
The default setting for the "Password for Non-Business Hours" parame-
ter is "OFF" (the screen is not displayed).
C252
2
2-39