Table of Contents
Advertisement
8
4
Using the keypad, type in the starting page number.
–
If necessary, touch [Chapter], and then use the keypad to type in
the chapter number.
–
The setting for "Page #" can be set to a number between –99999
and 99999, and the setting for "Chapter" can be set to a number
between –100 and 100. When specifying a starting number, switch
the number between positive and negative by pressing the [
If a negative value is specified, the numbers are not printed until the
numbering reaches 1. For example, if "–1" was specified, the num-
bers are printed starting with "1" on the third copied page.
–
To cancel changes to the settings, touch [Cancel].
–
To cancel the "Page #" function, touch [OFF].
5
Specify the page number format.
6
Touch [Print Position], and then select the printing position.
–
To make fine adjustments to the printing position, touch [Change
Adjustment]. Select the desired direction under "Left & Right Ad-
justment" or "Top & Bottom Adjustment", touch [↔] to switch be-
tween the integer and the fraction, touch [–] and [+] to specify the
adjustment amount, and then touch [OK].
–
If a decimal value is displayed in the screen, press the [C] (clear)
key, and then use the keypad to type in the adjustment amount. For
details on switching between decimal and fraction values, refer to
"System setting" on page 12-17.
8-72
Application functions
] key.
C252
Advertisement
Table of Contents
Troubleshooting
