Konica Minolta bizhub C525 User Manual page 442

Application functions
– If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
– To also specify settings for Application functions "Cover Mode",
"Insert Sheet" and "Chapters", touch [Insert Sheet Setting], and
then select the settings for the pages to be printed.
– Blank pages inserted using the "Cover Mode", "Insert Sheet" and
"Chapters" functions are only counted, but page numbers are not
printed on them.
– If "Except for Front Cover" or "Do Not Print Page #" is selected un-
der "Cover Mode", page numbers are printed starting with "2" in
single-sided copies and starting with "3" in double-sided copies.
– If "Do Not Print Page #" is selected, inserted pages are only count-
ed, but page numbers are not printed on them. If "Skip the page(s)"
is selected, inserted pages are not counted and page numbers are
not printed on them.
What are the limits on the adjustment amount?
?
% The print position can be finely adjusted in 1/16-in. increments.
Can no adjustments be made?
?
% To make no left/right or up/down adjustments, touch [No Adj.].
C252
8
8-73