Konica Minolta bizhub C525 User Manual page 83

2
No. Part Name
25 ADF connector
26 Filter 1
27 Power connector
28 Dehumidifier heater power switch
29 Filter 2
30 TEL jack 2
31 LINE jack 2
32 TEL jack 1
33 LINE jack 1
34 IEEE1284 port (type C)
35 USB port (type B)
USB 2.0/1.1-compliant
36 Internal controller port
37 Network connector
(10 Base-T/100 Base -TX)
38 Ozone filter
39 Finisher connector
2-10
Before making copies
Description
Used for connecting the ADF hookup cord
Collects the toner dust generated in the machine
Used for connecting the power cord
Used to turn the dehumidifier heater on and off.
Turning on the dehumidifier heater reduces mois-
ture in the paper. This switch is used when the op-
tional dehumidifier heater is installed.
Collects the toner dust generated in the machine
Used for connecting a telephone
Used for connecting a general subscriber line. This
jack is used when the optional fax multi line is in-
stalled.
Used for connecting a telephone
Used for connecting the general subscriber line
Used for connecting the parallel cable from the
computer
Used for connecting a USB cable from the compu-
ter
Used for connecting the internal controller
Used for connecting the network cable when this
machine is used for network printing and network
scanning
Collects the ozone generated in the machine
Used for connecting the finisher hookup cord
C252