Konica Minolta bizhub C525 User Manual page 395

8
4
Touch [Book Copy].
The Book Scanning screen appears.
[Booklet Original] appears if the saddle stitcher is installed on optional
finisher FS-514 or optional finisher FS-603 is installed.
5
Touch the button for the desired setting.
– Touch [↔] to switch between the integer and the fraction, touch
[–] and [+] to specify the width to be erased, and then touch [OK].
– If a decimal value is displayed in the screen, use the keypad to type
in the setting. For details on switching between decimal and frac-
tion values, refer to "System setting" on page 12-17.
– If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
– If [Separation], [Front Cover] or [Front and Back Cover] is selected,
"Position" appears. Select the binding position of the document.
– If necessary, touch [Erase] or [Center Erase] under "Book Erase".
Select the desired area to be erased, touch [–] and [+] to specify the
width to be erased, and then touch [OK].
– If a Book Erase function is specified, touch [Image Adjustment] in
the Application screen, touch [Standard Size], and then specify the
size of the document.
– To cancel changes to the settings, touch [Cancel].
8-26
Application functions
C252