Konica Minolta bizhub C525 User Manual page 325

5
Message
Please insert Fusing Unit
and close all doors.
Please install toner car-
tridge, and close all
doors.
Please insert Waste Ton-
er Box and close all
doors.
Please insert Image
Transfer Belt Unit and
close all doors.
Replenish paper.
Toner cartridge (X) needs
to be replaced soon.
There is no Toner.
Stapler empty. Replace
Staple Cartridge or can-
cel Staple mode.
Misfeed detected.
Reinsert the following #
of originals.
Malfunction detected.
Please call your Techni-
cal Representative.
Now Downloading Pro-
gram Data from
Firmware server.
5-60
Cause
The fusing unit is not installed
correctly.
The indicated toner cartridge
is not installed correctly.
The waste-toner box is not in-
stalled correctly.
The image transfer belt unit is
not installed correctly.
The indicated tray has run out
of paper.
The toner for the indicated
color is about to run out.
Since the toner for the indi-
cated color has run out, the
machine is unable to make
copies.
The staples have run out.
Since a paper misfeed oc-
curred, the machine is unable
to make copies.
After clearing a paper mis-
feed, it is necessary to reload
certain pages of the docu-
ment that have already been
fed through the ADF.
The machine malfunctioned
and is unable to make copies.
ΠCS Remote Care was acti-
vated by the technical repre-
sentative.
 Internet ISW is being
downloaded.
Troubleshooting
Remedy
Reinstall the supplies or parts, or
contact your technical representa-
tive.
Load paper into the indicated tray.
(See "Loading paper into the 1st
tray" on page 2-47, "Loading paper
into the 2nd, 3rd or 4th tray" on
page 2-53, "Loading paper into the
LCT" on page 2-55, and "Loading
paper into the bypass tray" on
page 2-58.)
Prepare to replace the toner car-
tridge according to your mainte-
nance agreement.
Replace the toner cartridge accord-
ing to your maintenance agreement.
Replace the staple cartridge. See
"Replacing the staples" on
page 9-10.
Clear the paper misfeed. (See
"When the message "Misfeed de-
tected." appears" on page 5-5.)
Load the indicated document pages
into the ADF.
Inform your technical representative
of the code displayed on the touch
panel.
Do not turn off the machine with the
[Power] (auxiliary power) key while
this message is displayed.
After turning off the machine with
the [Power] (auxiliary power) key,
turn off the main power switch, and
then contact the technical repre-
sentative.
C252