Konica Minolta bizhub C525 User Manual page 404

Application functions
5
Select the layout method.
6
Check the scanning size under "Scan Range", touch [OK], and then
touch [OK] in the next screen that appears.
– If the document size does not appear under "Scan Range"or to
specify the scanning area, touch [Set Range], and then specify the
area to be scanned from any of the screens.
– When the document is loaded into the ADF, the document size is
automatically detected when the [Start] key is pressed, so no doc-
ument size appears under "Scan Range".
– To cancel changes to the settings, touch [Cancel].
C252
8
8-35