4. Connect fuel hose from top of low pressure fuel pump to 90 elbow on back side of
vapor separator. Secure hose with 15.3 mm full circle clamp (54-856880) using crimp-
ing tool 91-803146T. (Back view of vapor separator shown below)
a -
Vapor Separator Installation
1. Secure vapor separator to air plenum with 3 bolts. Torque bolts to 45 lb. in. (5.0 Nm).
2. Connect fuel inlet hose from pulse pump.
3. Connect fuel outlet hose and fuel return hose to vapor separator.
a -
b -
c -
d -
e -
90-855347R1 JANUARY 1999
Secure Fuel Hose with 15.3 mm Full Circle Clamp (54-856880)
c
d
a
f
Mounting Bolts [Torque to 45 lb. in. (5.0 Nm)
Fuel Inlet Hose
Fuel Outlet Hose
Fuel Return Hose
Low Pressure Electric Fuel Pump (6 - 9 psi)
f -
Inlet Fuel Hose to Low Pressure Pump
DIRECT FUEL INJECTION
b
e
57317
a
57293
Page 3B-31