Write-Protecting A Tape Cartridge - DEC 4000 Model 200 Operation Manual

Figure 3–9: Labeling a Tape Cartridge
Label Slot
To indicate that the tape was recorded on a TK70 tape drive, check the box
labeled 296MB. The 95MB box is used for tapes recorded on a TK50 drive.
NOTE: Do not write on the tape cartridge or attach labels to the top, bottom,
or sides of the cartridge.

3.1.3.3 Write-Protecting a Tape Cartridge

Write-protecting a tape cartridge prevents accidental erasure of information
stored on the tape. You can write-protect a tape cartridge in two ways:
• Set the write-protect switch on the cartridge to the write-protect
position.
MLO-000960
Operating the System Options 3–21