Language Selection Menu - DEC 4000 Model 200 Operation Manual

Enable/Disable switch and automatically boot software after an error
halt condition or power-up, even if breaks are enabled.
• If you want data on a particular ISE to be write protected, you must
set the Write-Protect switch to in (glows).
NOTE: ISEs containing system software and user accounts must remain
write enabled. ISEs containing applications or sensitive data may be
write protected.
• If you want to use the Language Selection Menu to select a new
language for the console program, before you turn on your system, set
the Power-Up Mode switch to Language Inquiry Mode. A human profile
indicates the Language Inquiry Mode. When you turn on your system,
a Language Selection Menu appears, as shown in Figure 2–1.
Figure 2–1: Language Selection Menu
KA660-A Vn.n VMB n.n
1) Dansk
2) Deutsch (Deutschland/Osterreich)
3) Deutsch (Schweiz)
4) English (United Kingdom)
5) English (United States/Canada)
6) Español
7) Français (Canada)
8) Français (France/Belgique)
9) Français (Suisse)
10) Italiano
11) Nederlands
12) Norsk
13) Português
14) Suomi
15) Svenska
(1..15):
Select a language by typing in the number listed next to the language.
Save the language you have selected by rotating the Power-Up Mode
switch to Run Mode, indicated by an arrow.
NOTE: If you do not select a language within 30 seconds, the system
defaults to English (United States/Canada).
Operating the System 2–3