5. System Setup and Operation
How to Realize the LOGO Capture
How to Realize the LOGO Capture
1. Push [MENU] button and enter the menu item, rotate the knob, and
Select [LOGO CAPTURE] option, OLED shows as follows:
2. Choose the input source.
3. Freeze image, when capture LOGO, the program image should be
frozen.
4. Set the LOGO horizontal position, vertical position, horizontal size and
vertical size.
5. Save the image to LOGO1 or LOGO2.
6. Start to capture LOGO.
VSP 5360
—>SELECT INPUT
FREEZE IMAGE
H POS
V POS
H SIZE
V SIZE
SAVE TO
START CAPTURE LOGO
Note
The LOGO Button can also fulfill this setting.
User Manual
LOGO
OFF
0
0
1024
768
LOGO 1
57