Split; Input Setup - RGBlink VSP 5360 User Manual

4. Menu Orientation
MENU
initialized operation to recover factory setting.
For more details, please refer to: How to Set up the Screen Parameter.

SPLIT

Push [MENU] button, OLED shows the menu, rotate the knob and select
<SPLIT>, push the knob to confirm, there are 5 kinds of split modes, shown
as follows:
HORIZONTAL 1/2: User can set H total, V total, first width, H pos and V
pos.
VERTICAL 1/2: User can set H total, V total, first height, H pos and V pos.
FIELD GLYPH: User can set H total, V total, first width, first height, H pos
and V pos.
HORIZONTAL 1/4: User can set H total, V total, first width, second width,
third width, H pos and V pos.
VERTICAL 1/4: User can set H total, V total, first height, second height,
third height, H pos and V pos.

INPUT SETUP

Push [MENU] button, OLED shows the menu, rotate the knob and select
<INPUT SETUP>, push the knob to confirm, show the level 2 menu as
follows:
PROGRAM SWITCH: User can choose ON/OFF to open or close the
function.
PICTURE: Picture setting, the sub-menu as following:
BRIGHTNESS: It can change the image color BRIGHTNESS via
BRIGHTNESS Settings.
CONTRAST: It can change the image color CONTRAST via CONTRAST
settings.
SATURATION: It can change the image color SATURATION via
SATURATION Settings.
VSP 5360 User Manual 41