How To Realize The System Mode Setting; Stand Mode Setting; Single Image Switching; Pip Setting - RGBlink VSP 628PRO User Manual

6. System Setup and Operations

How to Realize the System Mode Setting

How to Realize the System Mode Setting
VSP 628PRO supports 3 kinds of system modes: Stand, Dual 2K and
Switcher. Push the [MENU] button to enter to the menu items, choose
<System>, push the knob to confirm. Turn the knob, choose <System
Mode>, user can choose the mode according to actual need.

Stand Mode Setting

In this mode, all the inputs are the same image, the same resolution, and
support fade in fade out switch. Each input signal supports scale, effects
setting independently.

Single Image Switching

VSP 628PRO can realize seamless effects switching between two channels.
Push the signal button, and the signal will be switched to the LED display.
For example, the [SDI1] button light is on, it means the signal of LED display
is SDI1, if user need to switch to VGA signal, push the [VGA] button, and the
signal will be seamless cut or fade in fade out to the LED display. User can
adjust the switch speed in <Trans Time> option in <Transition>by pushing
the [MENU] button.

PIP Setting

Enable the PIP function:
VSP 628PRO supports seamless switch in single image and double images.
Push the [PIP] button, the button light is on, and enable the PIP function.
Choose the signal in PIP:
VSP 628PRO can output two same or different signals to the LED display,
the settings are as follows:
VSP 628PRO User Manual 62